-
Placement of a new train scale
-
Preparations of railway track – cut off rails
-
Digging the foundation
-
Anchor 1st pre-assembled module in place
-
Unload and place the base plates for 1st and 2nd module
-
Anchor 2nd pre-assembled module in place
-
Preparation of fundament for 2nd pre-assembled modules
-
Installation of both pre-assembled modules
-
Placement of one load cell in the module
-
Installed load cell between railwaybridge and module
-
-
Inside the railwaybridge: 2 load cells installed
-
Filling and level the area around the module and railway bridge
-
Connecting the railway bridge to the railway net
-
Completion of railwaybridge
-
-
Pre-Calibration with 5Tons
-
Calibration up to 120Tons by 2x 60tons on each railwaybridge
-
Calibration up to 120Tons
-
Calibration with 50Tons
-
Calibration with 5-50Tons
-
Calibration with 5-15 Tons
-
Calibration with 5-15 Tons
-
Calibration with 5-15 Tons
-
Train Scale is electrically connected with the indicator
Installation of a Train Scale
1. Placement of a new Train Scale
2. Preparations of railway – cut off rails
3. Digging the foundation
4. Delivery truck pulls up next to the foundation
5. Lifting separately 1st and 2nd module with 2 cranes
6. Anchor the pre-assembeld modules into the foundation onto the base plates
7. Lifting separately 1st and 2nd railwaybridge with 2 cranes
8. Anchor the 2 railwaybridges onto the 2 modules
9. Installation of the railwaybridges onto the modules
10. Filling and level the area around the module and railweighbridge
11. 8 load cells (4 of each railwaybridge) are installed and connected to the indicator
12. Calibration of the Train Scale
13. Trains scale is electrically connected with the indicator and calibrated after passing successfully verfication.
